Zhengzhou Perfect Co., Ltd.
One-stop solution for paper cup / bowl/ box production factories
Add to Cart
Eco Friendly Single Double Face No Glue Environmental Paper Straw Machine
paper straw machine
This Machine is suitable for producing different sizes of paper straws and very small paper tubes. It adopted with PLC controller; main motor is equipped with variable frequency speed regulation; touch screen man-machine interface. Easy for parameters setting & operating. Cutting section adopted with numerical multi-blades cutting system. Servo synchronous tracking cutting system makes it higher precision and multi-blades cutting makes it higher efficiency. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
Eco Friendly Single Double Face No Glue Environmental Paper Straw Machine
1. Adapted to PLC and human-machine interface, the paper straw machine is super easy to operate.
2. 2. Adopting high quality electrical parts from world famous brands. The straw machine has a long service life.
3. With stainless steel body and protective cover. Finished paper straws are clean and safe.
4. Equipped with infrared dryer to improve the dryness and hardness of the paper straws.
5. The multi-blade cutting system ensures high productivity. It is easy to adjust the cutting distance with these gas cylinders.
Technical Parameter of paper straw machine
| Surace Layer paper roll thickness 60gsm, middle & inner layer is 120gsm |
| If you need printed paper straw, only need to print the 60gsm thickness paper roll. |
| Paper Roll can be coated with Wax as per your requirements. |
| The proportion of paper roll and glue is 1000kgs paper roll: 150kgs glue. |
| One ton paper roll can do around 850000pcs of paper straw. |
| It is water base glue, must be food grade. |
| Technical Parameter | |
| Paper Layer | 3 layers |
| Inner Diameter | 3.5-12 mm |
| Min. Length | 90 mm |
| Wall Thickness | 0.5-1.5 |
| Speed | Up to 100 m/min. |
| Rewinding Noses | Two noses/single belt |
| Cutting method | Pneumatic blades |
| Gluing way | Single/Double face or no glue |
| Length fixation | Encoder |
| Way of shaft fixing | Pushing |
| Speed control | Servo |
| Operator | 1 person |
| Power input | 3*380V |
| Measurement & Weight | |
| Main machine size | 3511*1265*1800mm |
| Area space | 5000*5000mm |
| Wheel hub diameter | 215 mm |
| Wheel hub height | 125 mm |
| Min. tread | 320 mm |
| Max. tread | 500 mm |
| Weight | 1700kgs |
| Drive system | |
| Main power | 3.0 kw |
| Max. Rotate speed of wheel hub | 200 r/min |
| Output torque | 68 N.m |
| Drive of wheel hub | 2 wheel drive |
| Bearing | NSK |
| Control system | |
| PLC Controller | Delta |
| Man-machine interface | Weinview |
| Servo system | Delta |
| Actuator | Schneider |
| Signal components | Omron |
| Pneumatic component | Airtac |
| Synchronism control | Servo Flying Cutting system |
| Synchronous tracking cutting system | Electronic cam flying shear servo system |
| Outfit assembly | |
| Tube holder | Standard |
| Belt angle adjusting | Hand wheel adjustment |
| Belt tension adjusting | Hand wheel adjustment |
| Stop when paper break | Standard |
| Auto glue feeding | Diaphragm pump |
| Lubrication | Electric roller |
| Paper tension control | Constant tension control |
| Paper reel stand type | Automatic paper receiving |
| Belt | Film baseband |
| Enclosed component | |
| Mandrel | 3 pcs |
| Belt | 5 pcs |
| Tools | 1 set |
| Air compressor | optional |
| Automatic cutter adjustment device | optional |
